Quick answer
Turn it off, place it on level lawn, remove anything under the chassis or wheels, and clean accessible moving areas.
Illustrative troubleshooting image; not a manufacturer product photo.
Fix it in this order
- Power off safely.
- Move to level lawn.
- Inspect underneath with gloves.
- Check roots holes stones and edging.
- Clean moving body areas.
- Correct or exclude the feature.
- Supervise a repeat pass.
What usually causes this?
Roots, stones, toys, branches, holes, high edging, abrupt terrain, packed debris, or a sensor fault may cause it.
How to verify the fix
The mower should sit normally and cross the repaired area without another Lifted message.
Do not skip this check: repeat the affected action under supervision before restoring schedules.
Frequently asked questions
Should I reset it first?
No. Record the exact message and inspect the likely physical or connection cause first.
Should I replace a part immediately?
Only after official checks isolate that component.
When should I stop?
Stop for damaged wiring, unusual heat, swelling, burning odor, water inside electrical parts, or repeated hardware faults.
When to contact support
Contact Husqvarna support if the message returns after the official checks. Send the model, serial number, firmware version, photos, and a short video.
Source and scope
Primary reference: Husqvarna official support.
RobotMower.help is independent and is not affiliated with or endorsed by Husqvarna. Product behavior can vary by model and firmware.