Navimow X4 Error Code 4103: Communication Interrupted
Error 4103 means communication was interrupted and the X4 could not continue communicating normally.
Reviewed October 7, 2026 by RobotMower.help. Independent guidance checked against the official support source linked below.
Quick answer
Press STOP to clear the code and restart the mower once if it returns. Escalate a repeated 4103 with the exact time and serial number.
4103 at a glance
| Mower | Navimow X4 |
|---|---|
| Code | 4103 |
| What the official steps point to | Communication Interrupted Error |
What 4103 means
Navimow describes 4103 as a temporary communication loss. The owner-facing correction is intentionally narrow: clear the code, then restart if needed. A repeat fault needs support evidence rather than repeated resets.
Fix Navimow X4 4103 step by step
- 1. Press STOP to clear 4103.
- 2. Wait for the mower status lights and app state to settle.
- 3. Check whether another communication or station alert appeared first.
- 4. If 4103 returns, restart the X4 once.
- 5. Reconnect the app and confirm the mower reports online.
- 6. Run a short supervised status test.
Check these conditions before resetting anything
- The mower has stable battery power.
- The charging station and mower are not being power-cycled repeatedly.
- The app is connected to the correct account and mower.
- The fault time is recorded if it repeats.
Do not perform repeated factory resets for a communication interruption. Preserve the sequence of alerts so support can identify which link failed first.
How to verify the fix
The mower should remain online and accept normal commands without 4103 returning.
If the same code returns, record the exact time, mower location, indicator status and any earlier alert. That sequence is more useful to support than repeated resets.
When to contact support
Contact Navimow if 4103 continues after one restart. Send the serial number, date, time and a video or screenshots.
Frequently asked questions
What does X4 error 4103 mean?
It means communication was interrupted.
Can I restart the mower?
Yes. Navimow recommends restarting if clearing the code does not resolve it.
What should I record?
Record the serial number and exact date and time, plus screenshots or video.
Related robot mower help
Source and scope
Primary reference: official Navimow support guidance for 4103.
RobotMower.help is independent and is not affiliated with or endorsed by Navimow. This guide explains owner-safe checks and does not replace the manufacturer manual or professional service.