Home / Navimow / i2 AWD Error Codes
The mower cannot acquire the local map it needs for navigation and mowing.
Reviewed October 4, 2026 by RobotMower.help. Independent guidance checked against the official manufacturer documentation.
Press STOP, restart the mower, and test once. Contact support if the local map still cannot be acquired.
If error 6102 returns after one controlled retry, stop repeating resets and record the mower serial number, firmware version, location, time, and a video of the behavior.

| Code | 6102 |
|---|---|
| Official meaning | Local Map Acquisition Error |
| Likely area | a temporary map-loading interruption, corrupted local data, or an internal communication fault |
| First action | Press STOP, restart the mower, and test once. Contact support if the local map still cannot be acquired. |
The mower cannot acquire the local map it needs for navigation and mowing. The code identifies the system reporting a problem, but it does not automatically prove that a specific part has failed.
For code 6102, focus first on a temporary map-loading interruption, corrupted local data, or an internal communication fault. Use reversible external checks before changing maps, moving equipment, or requesting service.
A single occurrence can follow a temporary interruption or difficult operating condition. Complete the official steps and supervise one short task.
Inspect that exact spot for terrain problems, obstacles, poor clearance, satellite obstruction, or restrictive map geometry. A location-specific pattern is valuable diagnostic evidence.
An immediate or yard-wide recurrence is less likely to be one isolated terrain problem. Record the serial number, firmware and app versions, date and time, and a clear video before contacting support.
Turn the mower off before checking wheels, blades, the underside, sensors, cables, or charging contacts. Do not open the battery pack or sealed electronics. Do not repeatedly factory-reset, remap, force moving parts, or improvise electrical tests unless official support specifically instructs you to do so.
The mower cannot acquire the local map it needs for navigation and mowing.
Press STOP, restart the mower, and test once. Contact support if the local map still cannot be acquired.
Only after the code clears and the mower completes a short supervised test without abnormal movement, charging, positioning, or safety behavior.
Contact support when the code returns after the official first steps, appears immediately after restart, or the mower cannot operate safely.
If you started with the mower behavior rather than the code, use our guide to Navimow i2 AWD map loading problems. It compares this alert with similar i2 AWD faults.
Segway Navimow support documentation for error 6102. RobotMower.help is independent and is not affiliated with Segway Navimow.