Navimow X4 Error Code 6114: Position Data Error
Error 6114 means the X4 encountered a position-data problem that may interrupt navigation or task execution.
Reviewed October 7, 2026 by RobotMower.help. Independent guidance checked against the official support source linked below.
Quick answer
Press STOP and try continuing the task. Restart once if 6114 remains, then contact support if the position-data error returns.
6114 at a glance
| Mower | Navimow X4 |
|---|---|
| Code | 6114 |
| What the official steps point to | Position Data Error |
What 6114 means
Navimow identifies 6114 as a position-data error. The official flow first tests whether the task can continue, then uses one restart. It does not instruct owners to move the antenna or erase the map immediately.
Fix Navimow X4 6114 step by step
- 1. Press STOP to clear 6114.
- 2. Record where the mower was and whether it was near a wall, tree or narrow passage.
- 3. Try continuing the current mowing task once.
- 4. If 6114 returns, move the mower only if needed for safety.
- 5. Restart the X4 once.
- 6. Allow positioning to complete and perform a short supervised test.
Check these conditions before resetting anything
- The mower has a reasonable view of the sky.
- The RTK or positioning equipment has not moved.
- The mower is inside the mapped area.
- No earlier GNSS or map code remains unresolved.
Do not relocate the antenna or delete the map as the first response. Those changes can create a second positioning problem and erase useful evidence.
How to verify the fix
The X4 should show a stable position and continue its task without 6114.
If the same code returns, record the exact time, mower location, indicator status and any earlier alert. That sequence is more useful to support than repeated resets.
When to contact support
Contact Navimow if 6114 persists after one restart. Provide the serial number, exact time and screenshots or video.
Frequently asked questions
What does X4 error 6114 mean?
It means the mower has a position-data error.
Should I try the task again?
Yes. Navimow says to clear the error and attempt to continue the task.
Should I move the antenna?
Not as a first step. Preserve the installation and test the official clear-and-restart sequence.
Related robot mower help
Source and scope
Primary reference: official Navimow support guidance for 6114.
RobotMower.help is independent and is not affiliated with or endorsed by Navimow. This guide explains owner-safe checks and does not replace the manufacturer manual or professional service.