Home / Navimow / H2 Error Codes
Navimow H2 Error Code 7106: GNSS Module Error
Fix Navimow H2 error 7106: GNSS Module Error. Follow the official recovery order, verify the result, and know when to contact support.
Reviewed October 18, 2026 by RobotMower.help. Independent guidance checked against the official Navimow source linked below.
Quick answer
Press STOP to clear 7106. If the code remains, restart the H2 once. A recurring GNSS-module error requires Navimow support rather than antenna relocation or remapping.
What error 7106 means
Code 7106 identifies a mower GNSS-module error. This is more specific than generally weak GPS or RTK reception and should not be treated first as a map-design problem.
Fix error 7106 in the safest order
- Record the mower location and exact time.
- Press STOP to clear 7106.
- Wait for positioning to recover.
- If the code remains, restart the H2 once.
- Run one short supervised test in an open area.
- Contact support if 7106 returns.
Checks that prevent a repeat problem
- Do not move the charging station or delete the map first.
- Confirm no earlier power or communication alert explains the event.
- Preserve screenshots and positioning status.
- Do not open the GNSS hardware.
How to verify the fix
The H2 should acquire a stable position and operate without 7106.
Frequently asked questions
What does Navimow H2 error 7106 mean?
It means GNSS Module Error.
Should I factory reset the H2 for code 7106?
No. Follow the code-specific sequence first and preserve your map and evidence unless Navimow support directs otherwise.
When should I contact Navimow support?
Contact support when code 7106 returns after the official recovery steps or the mower cannot operate safely.
Related Navimow H2 help
Source and scope
Primary reference: official Navimow support guidance for H2 code 7106.
RobotMower.help is independent and is not affiliated with or endorsed by Segway Navimow. This guide explains owner-safe checks and does not replace the manufacturer manual or professional service.