Home / Navimow / H2 Error Codes

Navimow H2 Error Code 6105: Mower Out of Boundary

Fix Navimow H2 error 6105: Mower Out of Boundary. Follow the official recovery order, verify the result, and know when to contact support.

Reviewed October 25, 2026 by RobotMower.help. Independent guidance checked against the official Navimow source linked below.

Quick answer

Place the H2 on an open, flat spot inside the saved boundary or return it to the charging station. Press STOP to clear 6105, then resume the task.

What error 6105 means

Code 6105 means the mower is outside its mapped work area. Unlike code 6109, it does not specifically say the mower is stuck, so recovery begins by restoring a valid in-boundary position.

Fix error 6105 in the safest order

1. Stop the mower and identify where it left the work area.
2. Place it on open, flat ground clearly inside the saved boundary, or place it on the charging station.
3. Press STOP to clear 6105.
4. Wait for the mower to confirm its position.
5. Resume the task under supervision.
6. Inspect the boundary location if the mower leaves the map again.

Checks that prevent a repeat problem

• Keep virtual boundaries away from drop-offs, loose edges, and areas where wheels can slide.
• Avoid restarting directly on the boundary line.
• Check for recent physical changes to the lawn or charging-station location.
• Do not delete the entire map after a single isolated event.

How to verify the fix

The H2 should recognize that it is inside the work area and continue without code 6105.

Frequently asked questions

What does Navimow H2 error 6105 mean?

It means Mower Out of Boundary.

Should I delete the map for H2 error 6105?

Do not delete the map unless the code-specific steps require a map change or Navimow support directs you to do so. Preserve the map and diagnostic evidence during the first recovery attempt.

When should I contact Navimow support about code 6105?

Contact support when code 6105 returns after the official recovery steps, a component remains blocked, or the mower cannot operate safely.

Related Navimow H2 help

• H2 error 6109: mower stuck out of boundary
• H2 error 6103: position acquisition error
• H2 cannot create a map
• Complete Navimow H2 error-code guide

Source and scope

Primary reference: official Navimow support guidance for H2 code 6105.

RobotMower.help is independent and is not affiliated with or endorsed by Segway Navimow. This guide explains owner-safe checks and does not replace the manufacturer manual or professional service.