Home / Navimow / H2 Error Codes

Navimow H2 Error Code 6115: Position Data Error

Fix Navimow H2 error 6115: Position Data Error. Follow the official recovery order, verify the result, and know when to contact support.

Reviewed October 25, 2026 by RobotMower.help. Independent guidance checked against the official Navimow source linked below.

Quick answer

Press STOP to clear error 6115 and continue the task. If it returns, restart the H2 once. Preserve the exact time and app screenshot for Navimow support if the position-data error persists.

What error 6115 means

Error 6115 means the H2 has reported a position data error. It is not the same as code 6103, where the mower cannot acquire a position, or code 7106, which identifies the GNSS module itself.

Fix error 6115 in the safest order

1. Record code 6115, the mower location, and the exact time.
2. Press STOP to clear the error.
3. Continue the current task once.
4. If 6115 returns, restart the mower once.
5. Allow positioning to initialize before starting a short supervised test.
6. Contact Navimow support if the same code returns again.

Checks that prevent a repeat problem

• Do not delete the map during the first recovery attempt.
• Save a screenshot of the app positioning status.
• Note any code that appeared immediately before 6115.
• Do not open or adjust positioning hardware.

How to verify the fix

The H2 should regain stable position data and complete a supervised task without code 6115 returning.

Frequently asked questions

What does Navimow H2 error 6115 mean?

It means Position Data Error.

Should I delete the map for H2 error 6115?

Do not delete the map unless the code-specific steps require a map change or Navimow support directs you to do so. Preserve the map and diagnostic evidence during the first recovery attempt.

When should I contact Navimow support about code 6115?

Contact support when code 6115 returns after the official recovery steps, a component remains blocked, or the mower cannot operate safely.

Related Navimow H2 help

• H2 error 6103: position acquisition error
• H2 error 7103: localization data streaming fault
• H2 error 7106: GNSS module error
• Complete Navimow H2 error-code guide

Source and scope

Primary reference: official Navimow support guidance for H2 code 6115.

RobotMower.help is independent and is not affiliated with or endorsed by Segway Navimow. This guide explains owner-safe checks and does not replace the manufacturer manual or professional service.