web analytics
Skip to content

Home / Navimow / H2 Error Codes

Navimow H2 Error Code 7302: Camera Data Streaming Fault

Fix Navimow H2 error 7302: Camera Data Streaming Fault. Follow the official recovery order, verify the result, and know when to contact support.

Reviewed October 18, 2026 by RobotMower.help. Independent guidance checked against the official Navimow source linked below.

Quick answer

Press STOP to clear 7302 and resume the task. If it fails again, restart the H2 once. Contact Navimow support if the camera data-streaming fault returns.

Unbranded robot mower in an open lawn positioning environment
Illustrative troubleshooting image; not a manufacturer product photo.

What error 7302 means

The H2 is not receiving the camera data stream it expects for navigation and obstacle awareness. This is a data-stream fault, not a camera calibration code.

Fix error 7302 in the safest order

  1. Record where and when 7302 appeared.
  2. Press STOP to clear the code.
  3. Resume the task once.
  4. If it fails, restart the mower once.
  5. Allow initialization to finish and run a short supervised test.
  6. Contact support if 7302 returns.

Checks that prevent a repeat problem

  • Make sure the camera area is externally clean and unobstructed.
  • Do not open or disassemble the camera module.
  • Note whether the fault appears everywhere or only in one area.
  • Save screenshots before restarting.

How to verify the fix

The H2 should resume navigation without code 7302 or another camera alert.

Frequently asked questions

What does Navimow H2 error 7302 mean?

It means Camera Data Streaming Fault.

Should I factory reset the H2 for code 7302?

No. Follow the code-specific sequence first and preserve your map and evidence unless Navimow support directs otherwise.

When should I contact Navimow support?

Contact support when code 7302 returns after the official recovery steps or the mower cannot operate safely.

Related Navimow H2 help

Source and scope

Primary reference: official Navimow support guidance for H2 code 7302.

RobotMower.help is independent and is not affiliated with or endorsed by Segway Navimow. This guide explains owner-safe checks and does not replace the manufacturer manual or professional service.