web analytics
Skip to content

Home / Navimow / H2 Error Codes

Navimow H2 Error Code 8101: Camera Sensor Not Calibrated

Fix Navimow H2 error 8101: Camera Sensor Not Calibrated. Follow the official recovery order, verify the result, and know when to contact support.

Reviewed October 18, 2026 by RobotMower.help. Independent guidance checked against the official Navimow source linked below.

Quick answer

Navimow does not provide an owner calibration procedure for H2 code 8101. Record the code and contact Navimow support for camera calibration assistance.

Unbranded robot mower in an open lawn positioning environment
Illustrative troubleshooting image; not a manufacturer product photo.

What error 8101 means

Code 8101 means the camera sensor does not have valid calibration. Unlike 7302, it is not a temporary camera data-stream problem, and repeated resets are not the prescribed fix.

Fix error 8101 in the safest order

  1. Stop the mower safely.
  2. Record code 8101 and the exact time.
  3. Save a screenshot and note whether the mower recently updated or was serviced.
  4. Do not attempt hidden menus or third-party calibration procedures.
  5. Locate the mower serial number in the app.
  6. Contact Navimow support for the required calibration path.

Checks that prevent a repeat problem

  • Keep the camera exterior clean.
  • Do not open, rotate, or adjust the sensor.
  • Avoid deleting the map because calibration is the named fault.
  • Provide a video if navigation is affected.

How to verify the fix

The repair is complete only when calibration is valid and 8101 no longer appears.

Frequently asked questions

What does Navimow H2 error 8101 mean?

It means Camera Sensor Not Calibrated.

Should I factory reset the H2 for code 8101?

No. Follow the code-specific sequence first and preserve your map and evidence unless Navimow support directs otherwise.

When should I contact Navimow support?

Contact support when code 8101 returns after the official recovery steps or the mower cannot operate safely.

Related Navimow H2 help

Source and scope

Primary reference: official Navimow support guidance for H2 code 8101.

RobotMower.help is independent and is not affiliated with or endorsed by Segway Navimow. This guide explains owner-safe checks and does not replace the manufacturer manual or professional service.