Home / Navimow / i2 AWD Error Codes
The mower detected that it is outside the defined mowing boundary.
Reviewed October 4, 2026 by RobotMower.help. Independent guidance checked against the official manufacturer documentation.
Place it on a flat open surface inside the boundary or on the charging station, press STOP, and resume once.
If error 6105 returns after one controlled retry, stop repeating resets and record the mower serial number, firmware version, location, time, and a video of the behavior.

| Code | 6105 |
|---|---|
| Official meaning | Mower Out of Boundary |
| Likely area | wheel slip, position drift, a boundary too close to an edge, or placement outside the saved work area |
| First action | Place it on a flat open surface inside the boundary or on the charging station, press STOP, and resume once. |
The mower detected that it is outside the defined mowing boundary. The code identifies the system reporting a problem, but it does not automatically prove that a specific part has failed.
For code 6105, focus first on wheel slip, position drift, a boundary too close to an edge, or placement outside the saved work area. Use reversible external checks before changing maps, moving equipment, or requesting service.
A single occurrence can follow a temporary interruption or difficult operating condition. Complete the official steps and supervise one short task.
Inspect that exact spot for terrain problems, obstacles, poor clearance, satellite obstruction, or restrictive map geometry. A location-specific pattern is valuable diagnostic evidence.
An immediate or yard-wide recurrence is less likely to be one isolated terrain problem. Record the serial number, firmware and app versions, date and time, and a clear video before contacting support.
Turn the mower off before checking wheels, blades, the underside, sensors, cables, or charging contacts. Do not open the battery pack or sealed electronics. Do not repeatedly factory-reset, remap, force moving parts, or improvise electrical tests unless official support specifically instructs you to do so.
The mower detected that it is outside the defined mowing boundary.
Place it on a flat open surface inside the boundary or on the charging station, press STOP, and resume once.
Only after the code clears and the mower completes a short supervised test without abnormal movement, charging, positioning, or safety behavior.
Contact support when the code returns after the official first steps, appears immediately after restart, or the mower cannot operate safely.
If you started with the mower behavior rather than the code, use our guide to Navimow i2 AWD boundary recovery. It compares this alert with similar i2 AWD faults.
Segway Navimow support documentation for error 6105. RobotMower.help is independent and is not affiliated with Segway Navimow.