ANTHBOT Error E104: LoRa Pairing Failed
Error E104 is handled as a LoRa pairing problem between the mower and its station.
Reviewed October 7, 2026 by RobotMower.help. Independent guidance checked against the official support source linked below.
Quick answer
Restart the mower, enter LoRa pairing mode and listen for the mower voice prompts confirming whether pairing succeeded.
E104 at a glance
| Mower | ANTHBOT robot mower |
|---|---|
| Code | E104 |
| What the official steps point to | LoRa pairing failure |
What E104 means
ANTHBOT directs E104 owners to re-pair LoRa. The mower announces entry into pairing mode and then announces whether the pairing attempt succeeded or failed.
Fix ANTHBOT robot mower E104 step by step
- 1. Restart the mower before starting a new pairing attempt.
- 2. Open the pairing procedure in the manual or ANTHBOT guide.
- 3. Enter LoRa pairing mode and confirm the mower gives the expected voice prompt.
- 4. Wait for the success or failure announcement before leaving pairing mode.
- 5. If pairing succeeds, restart once and run a short positioning test.
Check these conditions before resetting anything
- The mower and station both have stable power.
- The base station indicator is normal.
- The mower is close enough to pair without major obstructions.
- No earlier RTK power or station error remains unresolved.
Do not repeatedly press pairing controls without waiting for the voice result. Finish one attempt before starting another.
How to verify the fix
The mower should announce successful pairing and resume positioning without E104.
If the same code returns, record the exact time, mower location, indicator status and any earlier alert. That sequence is more useful to support than repeated resets.
When to contact support
Contact ANTHBOT if pairing fails or E104 returns after the mower announces successful pairing. Include the serial number, exact time and a short video of the attempt.
Frequently asked questions
What does ANTHBOT E104 involve?
The official procedure identifies E104 as a LoRa pairing issue and directs owners to pair again.
Should I restart before pairing?
Yes. ANTHBOT recommends restarting the mower before entering LoRa pairing mode.
How do I know pairing worked?
The mower should announce pairing success or failure through a voice prompt.
Related robot mower help
Source and scope
Primary reference: official ANTHBOT support guidance for E104.
RobotMower.help is independent and is not affiliated with or endorsed by ANTHBOT. This guide explains owner-safe checks and does not replace the manufacturer manual or professional service.