ANTHBOT Error E301: Return-to-Charge and Docking Failure
Clear the station area, clean the contacts and camera, confirm station power, then guide the mower into the dock manually for one…
Read the guide →Charging and docking
Robot Mower Charging Problems
Diagnose dock alignment, dirty contacts, station power, battery faults and return-to-charge failures without erasing maps or settings.
Start with the symptom
Narrow the charging failure first
A mower that cannot find the dock needs a different fix from one that docks correctly but will not accept a charge.
Will not return
Inspect the approach path, station position, guide wire or positioning status before moving the dock.
Docks but will not charge
Check mains power, charging contacts, corrosion, spring-loaded pins and battery temperature.
Stops during charging
Look for intermittent power, wet or contaminated contacts, overheating and firmware alerts.
Battery drains unusually fast
Separate battery aging from heavy terrain, blocked blades, cold weather and excessive wheel load.
Exact fixes
Charging and docking guides
Choose the model and symptom that most closely matches what the mower is doing.
Husqvarna Automower Empty Battery: Charging and Return Checks
Empty Battery may mean Automower could not reach the station, did not make contact, or has a battery or power problem. Place…
Read the guide →Worx Landroid Battery Voltage Too Low: Emergency Charging
Battery Voltage Too Low means the pack is too deeply discharged for normal startup. Seat the mower precisely on the powered base,…
Read the guide →Worx Landroid E7 Battery Temperature Out of Range
E7 means charging is paused because the battery is too hot or cold, or the mower cannot read it normally. Move the…
Read the guide →ANTHBOT Not Returning to Charging Station: Docking Fixes
When an ANTHBOT mower is not returning to the charging station, watch where it fails. Not finding the station area differs from…
Read the guide →Lymow Not Charging: Station, Contacts, and Power Checks
A Lymow mower that is not charging may have a supply problem, poor dock alignment, contaminated contacts, unsuitable temperature, or delayed app…
Read the guide →Navimow X4 Error Code 9111: Mower Not Charging
Navimow X4 error code 9111 means the mower is failing to charge. Check the charging area and station placement before contacting support.
Read the guide →Navimow X4 Error Code 2105: Battery Temperature Too High
Navimow X4 error code 2105 means the battery is too hot. Follow the safe cooling and reset steps, plus learn when to…
Read the guide →